Insights into the structural characteristics of cellulose for 5-hydroxymethylfurfural production
Recently, under the supervision of Associate Professor Chun-xiao Gong and Professor Zhen Fang, PhD student Mr. Ning Li published a research article focusing on the effects of cellulose structural characteristics on 5-hydroxymethylfurfural (HMF) production in Bioresource Technology.
In this study, various pretreatment methods, including ball milling (BM), deep eutectic solvents (DES), ethylenediamine, glycerol, phosphoric acid, and sodium hydroxide, were employed to regulate the polymorphic forms, crystallinity, and degree of polymerization of microcrystalline cellulose, thereby systematically investigating the effects of different structural characteristics on HMF production. The results showed that the transformation of cellulose I into cellulose II and III could improve HMF yields to some extent, with cellulose III achieving an HMF yield of 30.7% at 160 °C after 30 min of reaction. In comparison, BM and DES pretreatments were more effective in disrupting the ordered structure of cellulose. Notably, cellulose subjected to ball milling for 1.5 h achieved an HMF yield of 50.0% after only 5 min of reaction at 160 °C, while DES pretreated cellulose reached an HMF yield of 42.6% after 15 min. Further correlation analysis revealed significant negative correlations between HMF yield and both cellulose crystallinity and degree of polymerization (R² = 0.89 and 0.69, respectively). These findings indicate that reducing crystallinity, shortening polymer chains, and improving structural accessibility can facilitate the catalytic conversion of cellulose into HMF. This study provides new insights into the relationship between cellulose structural characteristics and catalytic reactivity, offering valuable guidance for the development of efficient biomass pretreatment strategies. systems.
Results were accepted in Bioresource Technology:
N Li, CY Yu, LJ Xu, W Chen, L Chen, Zhen Fang, CX Gong*, Insights into the structural characteristics of cellulose for 5-hydroxymethylfurfural production, Bioresource Technology, 2026.

纤维素预处理及结构特征与HMF生产的关系
Cellulose pretreatment and structural characteristics related to HMF production
博士生李宁Bioresource Technology:纤维素结构特性对5-羟甲基糠醛制备影响
最近,在龚春晓副教授和方真教授的指导下,博士生李宁在《Bioresource Technology》(Q1; Impact factor: 8.2)上发表了一篇关于纤维素结构特性对5-羟甲基糠醛制备影响的研究论文。
该研究采用球磨(BM)、深共熔溶剂(DES)、乙二胺、甘油、磷酸和氢氧化钠等多种预处理方法,对微晶纤维素的晶型、结晶度及聚合度进行调控,系统分析了不同结构特征对HMF生产的影响。研究发现,将纤维素I转变为纤维素II和III能够在一定程度上提高HMF产率,其中纤维素III在160 °C下反应30 min,HMF产率达到30.7%。相比之下,球磨和DES预处理能够更加有效地破坏纤维素有序结构。其中,球磨处理1.5 h的纤维素在160 °C下仅反应5 min,HMF产率便达到50.0%;DES处理所得纤维素在反应15 min时获得42.6%的HMF产率。进一步的相关性分析表明,HMF产率与纤维素结晶度和聚合度均呈显著负相关(R²分别为0.89和0.69),说明降低结晶度、缩短分子链并提高结构可及性,有利于促进纤维素向HMF的催化转化。该研究为理解纤维素结构与催化反应活性之间的关系,以及开发高效生物质预处理技术提供了新的思路。
结果发表在Bioresource Technology:
N Li, C Dong, L Xu, W Chen, L Chen, Zhen Fang, CX Gong*, Insights into the structural characteristics of cellulose for 5-hydroxymethylfurfural production, Bioresource Technology, 2026, Accepted for publication.